1972/74 PLYMOUTH BARRACUDA

LED CONVERSION INSTALLATION INSTRUCTION

It is always recommended to remove the taillight assembly from vehicle when installing new LED conversion kit, but with a little more effort LED can also be installed with the taillight on the car.

1- Disconnect negative battery cable

2- Remove bulb, and separate lens from taillight housing

3- Install new aluminum sleeve from the backside of taillight (threaded part in)

4- Install new mounting bracket, and nut over sleeve, and tighten nut with a needle nose pliers.

5- Place LED board on the bracket, and with the two 4-40 ½≤ bolts provided in the kit tighten LED

6- Connect LED bayonet to the original socket thru the taillight opening, and connect socket to the aluminum sleeve

7- Reinstall lens assembly , and connect battery cable

8- Inspect all taillight functions before driving