1969 PLYMOUTH ROAD RUNNER
LED CONVERSION INSTALLATION INSTRUCTION
It is always recommended to remove the taillight assembly from vehicle when installing new LED conversion kit, but with a little more effort LED can also be installed with the taillight on the car.
1- Disconnect negative battery cable
2- Remove taillight lens, and bulb
3- Install new aluminum sleeve from the backside of taillight (threaded part in)
4- Place one ¼², and one ½² aluminum spacers over threaded part of the sleeve
5- Place new bracket horizontally over the spacers, then install new mounting nut, and tighten nut with a needle nose pliers.
6- Connect LED bayonet to the original socket thru the taillight hole, and connect socket to the sleeve
7- Place LED board on the bracket, and with the two 4-40 ½² bolts provided in the kit tighten LED
8- Reinstall lens assembly , and connect battery cable
9- Inspect all taillight functions before driving