1968 DODGE CHARGER
LED CONVERSION INSTALLATION INSTRUCTION
It is always recommended to remove the taillight assembly from vehicle when installing new LED conversion kit, but with a little more effort LED can also be installed with the taillight on the car.
1- Disconnect negative battery cable
2- Remove taillight lens, and bulb
3- Install new aluminum sleeve from the backside of taillight (threaded part in)
4- Install new mounting bracket, and nut over sleeve, and tighten nut with a needle nose pliers.
5- Place LED board on the bracket, and with the two 4-40 ½² bolts provided in the kit tighten LED
6- Connect LED bayonet to the original socket thru the taillight opening, and connect socket to the aluminum sleeve
7- Reinstall lens assembly , and connect battery cable
8- Inspect all taillight functions before driving