1967/68 MUSTANG

LED CONVERSION INSTALLATION INSTRUCTION

It is always recommended to remove the taillight assembly from vehicle when installing new LED conversion kit, but with a little more effort LED can also be installed with the taillight on the car.

1- Disconnect negative battery cable

2- Remove taillight bezels, thick rubber seal, lens, seal, and bulb

3- Place new LED conversion with all the connectors attached, and install on the taillight housing

4- Connect LED bayonet to the original socket thru the taillight hole, and connect socket to the taillight housing

5- Install Thin lens gasket on top of the LED bracket

6- Reinstall lens, thick seal, and bezels

7- Connect battery cable

8- Inspect all taillight functions before driving